Detail Your Eyecandy's Specialist Preparation Procedures
A pH neutral snow foam solution is used to soften dirt and grime, the vehicle is then rinsed.
Wheel arches, all door shuts and if requested the engine bay cleaned with a citrus based degreaser.
A multi-stage clean, using soft lambswool mitts, a PH neutral shampoo, soft brushes and the two bucket cleaning method.
Alloy wheels are cleaned using separate buckets and a pH neutral wheel cleaner. The alloy wheels are fully turned and thoroughly cleaned using soft bristle brushes designed for all delicate surfaces including polished faces. On request we can remove alloy wheels, in order to obtain access to those otherwise unreachable areas such as suspension, arch liners and brake components.
The vehicle is rinsed to remove all shampoo and dirt from the first stage clean. We use a citrus degreaser and tar remover to agitate the necessary high-impact areas with soft, non-scratch detailing brushes.
Fallout remover is sprayed onto the paintwork, the alloy wheels and the glass to breakdown and remove any bonded contaminants and impurities including brake dust residue and iron filings.
A second rinse is performed using snow foam solution to ensure all product residue has been successfully removed prior to drying.
After drying of the vehicle has taken place all exterior surfaces including the paintwork, alloy wheels and glass are decontaminated further with the use of a clay bar. This removes further tree sap, tar and insects and leaves behind a perfectly smooth finish.